Middle School Home Energy AuditLIGHTING LAB |
|
|
|
|
INTRODUCTION
As we have learned, power is a determination of how fast work can be done. This means, that for a certain amount of work, more power means less time to accomplish the task. How well this works for someone using the power really depends on many factors. For example, does the work really need to be done rapidly or could some energy be saved by letting the work happen slower? There is a tradeoff for every increase in the speed of work we do. Sometimes we decide the extra cost in increased power is worth it, and sometimes we find the extra power is unnecessary.
Consider the lighting in a home, school, or office. We all know that sufficient light is needed to work effectively and live comfortably as we go about our daily routine. What is the cost in terms of energy that we pay for different types of lighting? What are the benefits to the lighting options we choose? Are certain types of lighting preferable or more efficient than others?
In this experiment, you will investigate and compare different types of light bulbs with respect to the light given off and the amount of power consumed. The data you collect will help guide a class discussion on energy use. Furthermore, your conclusions relating to energy usage and light production should help you make decisions with respect to your home energy audit and energy conservation ideas.
BACKGROUND INFORMATION
- To refresh your understanding of how energy and power are related, you may want to review the Energy Page and Power Page.
- Electricity travels in circuits. A switch opens and closes the "loop" through which electrons can flow. When a switch is "open," electrons can not flow in a circuit.
- Electrical power is measured in
- A kilowatt-hour (kWh) is equal to 1000 watts of power provided for one hour.
- Light is measured in lumens.
MATERIALS
HYPOTHESIS
Make a hypothesis for the experiment you are about to do.
PROCEDURE
DATA TABLESAFETY NOTE: SHOCK HAZARD!!! MAKE CERTAIN BEYOND ALL DOUBT THAT LIGHT SOCKETS AND WIRING ARE SAFE!!!
Additional Experiments:
- Install the lowest rated light bulb into the light socket. Plug the light socket into a working power outlet. Test the circuit and bulb by turning the light "on." If everything works, turn off the light and proceed to the next step. Consult your teacher if the light does not turn on. Record the type of light bulb and its power rating in your data table.
- Turn the light bulb on. Hold the light meter exactly 50 cm from the surface of the light bulb. Measure the amount of light coming from the light bulb in lumens using the light meter. Record the results in your data table.
- Repeat steps #1 and #2 for each of the light bulbs you have selected to test. Be sure to record the correct information in your data table for each bulb.
- When you have collected data for all of the bulbs, create a bar graph showing the light produced in lumens by each light bulb.
These may be done concurrently with the experiment above or completed separately.
- Connect the light socket to a power meter. Measure the actual power usage of the light bulb. How does the measured power use compare to the rating on the bulb itself?
- Use a simple hand-held spectroscope to observe and compare the spectra (different colors of light) produced by different types of bulbs. How does the spectra differ between light bulb types? Does the power rating of the bulb change the spectra? How might this be important?
- Use a power meter to determine how long particular light bulbs can remain on using only 1 kilowatt-hour of energy. Compare different combinations of number of separate bulbs and bulb power usage to maximize time and amount of light for a room or house. How might this influence lighting decisions in areas of limited power supply?
Create a table like the one below or use the TABLE 1. Amount of light in lumens produced by different types and powers of light bulbs.
light bulb Type (incandescent, compact fluorescent, halogen, etc.) Power Rating (Watts) Light Produced (lumens) Rank of light bulb from Lowest to Highest in terms of Light Produced
ANALYSIS QUESTIONS
CONCLUSION
Authors: Sue Emmons, Powell Midddle School, Littleton, CO; Kevin Lindauer, Baker Middle School, Denver, CO; Janet Stellema, Monarch K-8, Louisville, CO; John Sepich, Scott Carpenter Middle School, Westminster, CO; Edited by Marge Bardeen NTEP II Project PI.
Webmaster: ed-webmaster@fnal.gov
Created: September 9, 1998 revised July 30, 2001
URL: /ntep/f8/projects/nrel/student/lightinglab.html